7 articles Stitch Regulation

Nolting machine won’t start stitching at first or has inconsistent stitching with Butler or PerfectStitch

If your Nolting machine is not stitching a it should and you have already been through the steps to set machine type or motor load ratio, then you might be running into a timing issue with the machine. Nolting has recommended these steps to reset the hook timing on the machine. remove the bobbin and…

Why Does The Needle Sound Different In Baste Mode Than The Other Modes?

Needle up/Needle down makes a different, labored noise when moving up and down. Baste Mode uses a faster speed To prevent the needle catching in the fabric, Baste Mode operates at a faster speed than any other mode. Because of this, it sounds different when it performs a needle up/needle down in baste mode, because…

Why Does My Needle Return To The Down Position When It Is Supposed To Be Up?

The needle is returning to the wrong position. Check needle position buttons Ensure that the needle position is set to be needle up and not needle down. Check index counts Ensure the index itself is working.  This is done by turning the hand wheel by hand, and looking into the rear PCB box (easiest is…

Why Are My Stitches Uneven In Precision Mode?

The stitches do not stitch evenly in Precision mode. Check encoders Ensure that the encoders are riding freely on the rail. Remove any debris from the rail, and make sure that the rail is clean. Check handle bar connections Make sure the cable on the left and right buttons are attached securely in the handle…